Speedmaster Model Products is the USA manufacturer of precision top quality Radio Controlled Boat Hardware.

Manufactured using aircraft grade alloys on CNC State-of-the-Art Machine Centres.

Speedmaster Glow Engine Collets

Speedmaster stainless steel Glow Engine Collets are precision CNC machined in the USA. They incorporate a stainless steel collet insert that clamps away from the end of the flex shaft to ensure a more positive and secure clamp on the flex shaft.

1/4-28 thread to 3/16" flex, 1/4-28 thread to 1/4" flex, M6 thread to 1/4" flex, M8 thread to 1/4" flex, M10 thread to 1/4" flex.

Speedmaster Glow Engine "WIRE" Collets

Speedmaster stainless steel Glow Engine WIRE Collets are precision CNC machined in the USA. They incorporate a stainless steel collet insert that clamps away from the end of the wire shaft to ensure a more positive and secure clamp on the wire.

1/4-28 thread to 0.078" wire, 1/4-28 thread to 0.093" wire, 1/4-28 thread to 1/8" wire.

Speedmaster Flex Shaft Assemblies

High quality Speedmaster flex shaft assemblies come with welded and hardened stub plus imperial thread for prop nut. Standard left hand rotation only

1/4" step to 3/16" x 18" long: $49.60 each inc. GST  -  Export: AUD 45.10

1/4" step to 3/16" x 30" long: $62.95 each inc. GST  -  Export: AUD 57.25

Speedmaster Zenoah G231/260/300 PUM Engine Mount Kit

This engine mount kit is CNC machined from Aircraft grade alloy and comes complete with Quick Release Zenoah engine mounts for 5" rails, Coil Relocation Bracket, Throttle Linkage and Stainless Steel Nuts and Bolts.

Also fits RCMK K30S engine.

Speedmaster Zenoah G320PUM Engine Mount Kit

This engine mount kit is CNC machined from Aircraft grade alloy and comes complete with Quick Release Zenoah engine mounts for 5" rails, Throttle Linkage and Stainless Steel Nuts and Bolts.

Speedmaster Zenoah Throttle Kit

Speedmaster Throttle kit suits Zenoah 231/260/290/300PUM and RCMK K30 engines.

Includes all hardware items as shown in the picture.

Suits Walbro WT-644, WT-257 and WT-1048 carbs

Speedmaster Throttle Arm "only"

Speedmaster Throttle arm "only" to suit Walbro WT-257, also includes brass reducer bush to suit Walbro WT-1048 and WT-644 carbs.

Speedmaster .21 Mini Rudder Assembly

CNC machined from aircraft grade alloy with single water pickup. This Speedmaster rudder has a shear pin to allow the rudder to kick-back on impact to prevent damage.

Available with short Hydro or long Mono transom brackets

Speedmaster .40 and 60/90 Rudder Assembly

CNC machined from aircraft grade alloy with single water pickup. This Speedmaster rudder has a shear pin to allow the rudder to kick-back on impact to prevent damage.

Transom extensions available: 1 1/8", 1 5/8" & 2 1/4"

Speedmaster Large Rudder Assembly with Twin Pickups

This Speedmaster rudder has a shear pin to allow the rudder to kick-back on impact to prevent damage.

Rudder blade has two separate pick-ups and outlets, effectively doubling the water flow-rate

Transom extensions available : 1 1/8", 1 5/8" & 2 1/4" 

Speedmaster Large Rudder Assembly with Twin Pickups

The Rudder and hardware are the same with all these assemblies except for the difference of the length of the mounting brackets from transom to rudder leading edge. This Speedmaster rudder has a shear pin to allow the rudder to kick-back on impact to prevent damage.

Rudder blade has two separate pick-ups and outlets, effectively Doubling the water flow-rate.

4" Transom extension: Price: $115.90 inc GST  -  Export Price: AUD 105.40

5" Transom extension: Price: $119.95 inc GST  -  Export Price: AUD 109.05

Speedmaster Inline Strut / Rudder assembly

Large Inline Strut / Rudder assembly with twin water pickups, Skeg strut blade and 6" rudder extension. Suitable for large scale Mono and Cat hulls.

Rudder blade has two separate pick-ups and outlets, effectively doubling the water flow-rate.

Speedmaster VM-1 Small 3/16" Strut Assembly

Available with Round or Flat bottom. Strut bushing not included.

Speedmaster Medium Strut Assembly

Available in Mono style with long mounting brackets or Hydro style with short mounting brackets. Round or Flat bottom struts are available. Strut bushing not included.

VM-3 suit 3/16" Shaft: Price: $47.50 inc GST  -  Export Price: AUD 43.20

Speedmaster VM-MB67 1/4" Strut Assembly

1/4" round bottom strut with long flex shaft housing to suit Gas Mono's. Strut bushing not included.

Speedmaster 1/4" Cat/Hydro Strut Assembly

Suitable for Gas Cat/Tunnel hulls and Gas Sport Hydro hulls.

"Strut bushing not included"

Speedmaster 1/4" Strut Assembly with Skeg Fin

1/4" Strut with Skeg Fin is suitable for Gas Cat/Tunnel hulls.

"Strut bushing not included"

Speedmaster 1/4" 60/90/Gas Stinger Drive Assembly

1/4" 60/90/Gas Stinger drive to suit Deep Vee or Mono hulls. Includes 1/4" brass strut bushing.

Speedmaster 1/4" Gas Stinger Drive Assembly (OSB)

1/4" Gas Stinger drive to suit Deep Vee or Mono hulls. Includes 1/4" brass strut bushing.

Lead Teflon Bushes to suit most Speedmaster Struts

     3/16" I.D. x 1/4" O.D.  - $2.50 each inc GST  -  Export Price: AUD 2.30

Speedmaster Brass Strut Bushing

Speedmaster brass strut bushing with lubrication holes runs inside the brass stuffing tube that is fitted all the way through strut housing.

Suits 3/16" Shaft (Requires 1/4" Stuffing Tube): $11.00 inc GST - Export: AUD 10.00

Speedmaster Hydro Tuned Pipe Mount

Mounts on the deck or radio box. Commonly used on Hydro or Tunnel hulls.

Small: Suits 21 Glow tuned pipes: $31.60 inc GST - Export AUD 28.75

Speedmaster Transom Tuned Pipe Mount

Transom mounts and adjustable in length. Commonly used on Mono and Tunnels hulls.

Small: Suits 21 Glow tuned pipes: $46.30 inc GST - Export AUD 42.10

Speedmaster Low Profile Adjustable Trim Plates

CNC machined low profile trim plates available in varied sizes

   #100 - 1" W x 1 1/2" L  -  (4 per pack)

   #150 - 1 1/2" W x 1 1/2" L  -  (4 per pack)

   #200 - 2" W x 2" L  -  (2 per pack)

   #225 - 2 1/4" W x 1 3/4" L  -  (2 per pack)

   #300 - 3" W x 1 3/4" L  -  (2 per pack)

Speedmaster Billet Adjustable Trim Tabs

Precision CNC machined billet alloy trim plates with fine turnbuckle adjustment. Available in 2", 3" & 4" Length.

   #502- 1 1/2" W x 2" L (Pack 2) = $116.75 inc GST - Export: AUD 106.15

   #503- 1 3/4" W x 3" L (Pack 2) = $149.85 inc GST - Export: AUD 136.25

   #504- 1 3/4" W x 4" L (Pack 2) = $155.00 inc GST - Export AUD 140.90

Speedmaster Universal Motor Mount

Speedmaster Hydro Motor Mounts are constructed with rubber cushions to isolate motor vibrations. They come with spacers and side plates included and nicely fit between engine rails that are 4 to 5 inches in width.

Speedmaster Universal 1/2" Drop Motor Mount

Speedmaster Mono 1/2" drop Motor Mounts are constructed with rubber cushions to isolate motor vibrations. They come with spacers and side plates included and nicely fit between engine rails that are 4 to 5 inches in width.

Speedmaster Ultra Light .21 Mini Motor Mount

Speedmaster Hydro Ultra Light .21 Mini Motor Mounts are constructed with rubber cushions to isolate motor vibrations. They mount nicely between engine rails that are 4 inches in width.

Speedmaster Ultra Light .21 1/2" Drop Mini Motor Mount

Speedmaster Mono Ultra Light .21 Mini Motor Mounts are constructed with rubber cushions to isolate motor vibrations. They mount nicely between engine rails that are 4 inches in width.

Speedmaster Starter Handle

This must have item makes starting your boat a breeze. Fits Sullivan Dynatron starter and many other brands of starters with similar diameter. Pre-Wired and works great on 12/24 volt starters.

(Starter motor is not included)

Speedmaster Nylon Starter Belts

   14" Small - $16.15 each   -  Export Price: AUD 14.70 each

   17" Medium - $16.15 each  -  Export Price: AUD 14.70 each

Speedmaster Zenoah Coil Relocation Bracket

CNC machined from aircraft grade alloy to relocate ignition coil to over recoil starter.

Speedmaster Small Mono Turn Fin

Speedmaster Large Mono Turn Fin

Speedmaster Extra Large Mono Turn Fin

Speedmaster Servo Mounts

Machined from aircraft grade alloy, each mount includes a timber base allowing you to glue it directly to your radio box floor but still allowing the servo mount to be easily removed. Also includes stainless steel servo mounting screws.

Sizes available to suit Small, Medium and Large size Servos